LVL for pallet use
|Weifang Joysea Trade Company|
|Name||LVL for pallet use|
|Size||thickness(20mm-45mm)*Length(up to 8000mm)*Width(as request)|
|Material||All poplar, pine; hardwood|
|Usage||construction, packing ,furniture|
|Payment||L/C at sight—-T/T( 30% prepayment and the balance should be paid upon the copy of B/L .)|
|Delivery time||in 15 days after T/T with 30% deposit or L/C at sight|
|Package||standard export packing , or as customer demand|
Transference to concrete is set up very easily. There is no need for any transference preparation.
(1)Transference to concrete is set up very easily, so good for construction work. (There is no need for any transference preparation.)
(2)After installation of concrete, the surface looks like a mirror. (The cement does not stick.)
(3)You are able to use film faced plywood until the plywood itself is damaged. (Strong with nailing and knifing.)
(4)Environmentally friendly. (Even after incineration, there is no hazardous substance.)
(5)It can be used for a long time, and for the initial price paid for the material, you will feel its worth over time.
Always clean and repair the formwork panels before storage, the formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damage by bolts etc. If panels are wet, do not allow them to dry too rapidly.
Sealing of Edges:
Phenolic film faced plywood edges are fully sealed by the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic film faced plywood sheet any recut edges should sealed as soon as possible with water proof paint sealing of holes.
Any hole made in film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
Cleaning and Repair:
To obtain full life, cleaning should be carried out immediately after each use. Phenolic film faced plywood may be wiped with release agent or cleaned with water and stiffbrush. It may be necessary to use a hard wood scraperbut care should be taken not to damage the plywood face. Do no use a wire brush or sharp metal scraper to dislodge hardened concrete.
contact us:Telephone:0086-536-5605673 ;mail：firstname.lastname@example.org;Telephone：0086-13395366556